How To Put A Torch Lighter Back Together

Download Article

Download Article

Sometimes a lighter tin get stuck or broken. Generally it'due south a quick fix, simply it'due south also very piece of cake to buy a new i. The first step is diagnosing what is wrong with your lighter, and and so yous can get to piece of work fixing it. Don't get frustrated if it doesn't work immediately - check all potential bug before you give up. If your lighter has sentimental value you may be able to get it working again.

Things You Should Know

• Ensure the lighter isn't shattered first. Look for rust, debris, and dirt, check the fuel tank, and run across if there's a spark to diagnose the trouble.
• Refuel the lighter with butane. If the flame burns out, remove the metal around the flame pigsty.
• Replace the flint on your lighter. Y'all can practise this for both butane lighters and Zippo lighters, though the method varies.

1. 1

   Ensure that information technology isn't shattered. If yous broke the plastic function of your lighter then you lot'll need a new one. The force per unit area is compromised and you won't exist able to use it anymore.

2. two

   Look for rust, debris, or dirt. If you lot've left a lighter outside for a long flow of fourth dimension the metallic bike on meridian might be rusted in place. If it won't spin, it won't light. If there is only clay and debris within the lighter y'all might be able to clean it out with your fingers or a piping cleaner and go it going again. ^[1]

   Advertisement

3. 3

   Cheque the fuel tank. Luckily the most common trouble with these lighters is their incredibly small-scale fuel tank. When this no longer holds enough fuel or enough pressure, it needs to be refilled.

   • The most prone to mechanical and/or internal failure would be the not-reusable Bic lighters.

4. 4

   Wait to see if in that location is a spark. If at that place is no spark, that means that there is no flint. The flint is the piece of equipment that the wheel rubs against to create a spark. The spark lights the fuel and gives you lot a flame, then the flintstone is extremely important.

5. 5

   Check to run across if the flame is pocket-size, burns out, or isn't present at all. If the flame burns out then yous could be running out of fuel. All the same, if y'all just recently bought the lighter there might be an issue with the fuel reaching the spark.

Advertisement

1. 1

   Refuel your lighter. To do this for most lighters you'll need to buy a butane can. Y'all can buy one of these at your local hardware store. Make sure yous bleed all of the remaining fuel out of your lighter offset. Turn the lighter upside down with the make full valve facing upward. Put pressure on the fill valve and keep the lighter away from your face and away from anything flammable. ^[2]

   • Make certain the butane can nozzle fits in the hole in the bottom of the lighter. Information technology has to fit in the upright position with the lighter on meridian of tin. You'll want to insert the nozzle then flip the whole contraption upside down so that the lighter is under the can. At present apply pressure level until you feel the metal of the lighter get cold. That ways y'all've successfully gotten the butane inside.
   • For a Zippo lighter yous'll take to buy Zippo lighter fluid from the Zippo online shop.^[three]
   • Go along in mind, it'due south probably just easier to buy a new lighter unless you are fastened to your current 1.

2. 2

   Replace your flintstone on a butane lighter. ^[4] The flint is the piece of equipment that creates the spark. It's tiny blackness cylinder well-nigh a quarter inch long. To replace the flint, remove the metallic surrounding the flame and the spark wheel. You lot'll have to twist it out of position. One time you have removed the metallic y'all'll see that there is a spring. The spring should be about an inch to an inch and a half long. The flintstone is the modest piece of equipment that is about a quarter inch. It will be black and cylindrical. The flint is used to brand the spark. Remove the flint from this spring. Now put in a new piece of flint. Reassembling the lighter is easy - put the flint in, stick the spring dorsum in the hole, and so place the summit back on.

   • You can buy a new flint for 75 cents online.

3. three

   Replace your flint on a Zippo lighter. To replace the flint, flick open the lighter, and pull up on the chimney. The chimney is the thing with five holes of each side of it. You'll want to pull until its all the style out. Under the chimney there should be a piece of what looks like cotton that is held in place by a spiral. Advisedly unscrew the screw and pull it out forth with the spring and minor slice of metal within. Drib the new flintstone in, supervene upon the spring, tighten the screw, and replace the box back in the lighter casing. Yous should be good to become. ^[5]

4. 4

   Remove the metal that surrounds the flame hole if it is pocket-sized or burns out. This means you lot have a problem with your fuel release. You can exercise this with tweezers, needle-olfactory organ pliers, or anything else that works. Plough the nozzle from which the gas escapes counter-clockwise a few times. It might just be too tight. If that doesn't work you might might demand to get yourself a new i. Luckily they aren't that expensive. ^[6]

Advertisement

Ask a Question

200 characters left

Include your electronic mail address to get a message when this question is answered.

Submit

Advertisement

• Bic lighters commonly accept a child-proof safety-ring over the spark bike which can become quite abrasive...but to get rid of it but remove the metallic the surrounds the flame and pull upwardly on the safety band until its free (with pliers or fingers)

• The easiest way to remove the metallic effectually the flame (or "chimney") would be to utilise a blade or slender object to pry the side away from the button...just far enough to brand it over the latch that holds it in place

• When refueling a Zippo, information technology helps to leave the lighter upside down for a few seconds or a minute after having put more lighter fluid in

Show More than Tips

Advertisement

About This Article

Article Summary X

If your lighter isn't working, check to run into if the fuel tank is empty or the flint is gone, as these are simple to fix. Before you refuel your lighter, purchase a butane tin, which tin usually be establish at a local hardware store. To refuel, plow your lighter upside down and put pressure on the make full valve with the butane can nozzle. Once the nozzle is inside, apply pressure level until you lot feel the metal of the lighter get cold. Make sure to keep your lighter away from your face and annihilation flammable. If your lighter needs a new flint, twist the metal that surrounds the flame until it comes off and you tin can encounter a jump. And then, replace the flintstone attached to the leap and reassemble your lighter. For more advice, like how to supplant the flint on a Zippo lighter, scroll downward.

Did this summary assistance you?

Thanks to all authors for creating a page that has been read 560,822 times.

Did this commodity assistance you?

Source: https://www.wikihow.com/Fix-a-Lighter

Share this post